mikromedia Plus for FT90X
Product Code: MIKROE-2385
mikromedia Plus for FT90X
Start building your applications with intuitive, user-friendly menus and dashboards using powerful FT900 microcontroller. This board provides a compact high-quality multimedia development platform for FT900 device.
Fast and furious
Fast FT900 microcontroller with 256KB of Flash, 256KB of shadow RAM, operating at 100 MHz. Execution from shadow RAM gives it 3.1 DMIPS/MHz.
Large 4.3" Touch Screen
See the big picture. A 4.3” touch screen driven by FT810 graphics controller from FTDI delivers crystal sharp image in 480x272px resolution.
2.4GHz RF transceiver
Nordic’s nRF240L01+ transceiver with active chip antenna will make you forget about wires. Drive it with simple SPI commands. It that easy.
A whole lot of modules
Board has it all: USB connector, temperature sensor, PIN photosensor, IR receiver, accelerometer, battery charger, MP3 codec, audio speaker, etc.
Programming
On-board microcontroller is preprogrammed with fast USB HID bootloader, so it’s ready to work right out of the box. You don’t have to spend a dollar more on programmers. If you need a debugger use mikroProg for FT90x.
Compilers
Mikromedia Plus for FT90x is fully supported by mikroC, mikroBasic and mikroPascal compilers for FT90x. Compilers come with dozens of examples that demostrate every feature of the board.
GUI design with Visual TFT
Easily create fantastic colourful graphical user interfaces (GUI) for mikromedia in Visual TFT software. Even total beginners will be able to create amazing applications.
Package Contains
- Damage resistant protective box
- mikromedia PLUS for FT90x board in antistatic bag
- USB cable, microSD card 2GB and 3 headers (2x5 and a pair of 1x26)
Specification
| Type | TFT |
| Applications | Best used as a development board but also as a final product. Use cases include industrial, medical, automotive and other dashboards and equipment. |
| Display size | 4.3" |
| Resolution | 480x272px |
| Touch Screen | Resistive |
| Architecture | FT90x (32-bit) |
| MCU | FT900 |
| MCU speed | 100 MHz |
| MCU Memory | 256 KB of Flash, 256 KB of Shadow RAM |
| Programming | Preprogrammed with fast USB HID bootloader. Also features mikroProg for FT90x connector |
| Wireless connectivity | Nordic’s nRF240L01+ transceiver, IR receiver |
| Storage | 8 Mbit Serial Flash, microSD card slot |
| Sound and Audio | VS1053 MPEG audio decoder, audio speaker |
| Peripherals include | USB 2.0 OTG, Temp. sensor, RTC battery, PIN photosensor, Accelerometer, Battery Charger |
| Expandability | Two 1x26 headers, mikromedia standard pinout |
| Integration | Mounting holes |
| Input Voltage | 3.3V or 5V |
Downloads
mikromedia PLUS for FT90x mikrobootloader
mikromedia PLUS for FT90x AutoCAD file
mikromedia Plus for FT90X Examples v220
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
-
₹20,899.00
© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta