Search

Show:
Sort By:
1.8" SPI TFT display, 160x128 18-bit-ST7735R driver
We just love this little 1.8" TFT display, with true TFT color (up to 18-bits per pixel!), fine..
₹1,099.00
10 Segment LED - White
This is a segment LED bar without control chip. It has 10 segment LEDs, color is White. It is com..
₹169.00
10W Super Bright LED - Warm White with 60 Degrees Lens
INTRODUCTION This 10W super bright LED can be used as a flash searchlight for your robot projects..
₹689.00
152x152, 1.54inch E-Ink display module, yellow/black/white three-color
This is an E-Ink display module, 1.54inch, 152x152 resolution, with embedded controller, communicati..
₹1,589.00
152x152, 1.54inch E-Ink raw display panel, yellow/black/white three-color
Description 152x152, 1.54inch E-Ink raw display, yellow/black/white three-color, SPI interface, w..
₹789.00
212x104, 2.13inch E-Ink display HAT for Raspberry Pi, yellow/black/white three-color
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controlle..
₹1,879.00
212x104, 2.13inch E-Ink raw display panel, yellow/black/white three-color
212x104, 2.13inch E-Ink raw display, yellow/black/white three-color, SPI interface, without PCB T..
₹889.00
296x128, 2.9inch E-Ink display module, yellow/black/white three-color
296x128, 2.9inch E-Ink display module, yellow/black/white three-color, SPI interface. This is an ..
₹2,079.00
296x128, 2.9inch E-Ink raw display panel, yellow/black/white three-color
296x128, 2.9inch E-Ink raw display, yellow/black/white three-color, SPI interface, without PCB. T..
₹1,189.00
3D Printer Filament -ABS 1.75(Fluroscent White)
ABS is a recommended material for beginners. Features Loose temperature requirement Good ..
₹2,779.00
3D Printer Filament -ABS 1.75(White)
ABS is a recommended material for beginners. Features Loose temperature requirement Good ..
₹2,229.00
3D Printer Filament -ABS 3.0mm(WHITE)
Acrylonitrile butadiene styrene (ABS) is a common thermoplastic used in many applications. ABS is a ..
₹2,229.00
3D Printer Filament -PLA 1.75(White)
PLA is an environmental-friendly polymer originally derived from crops as maize. Different from ABS,..
₹2,229.00
3D Printer Filament -PLA 3.0mm(Bright White)
Polylactic Acid (PLA), is a thermoplastic aliphatic polyester also known as Polylactide. PLA is avai..
₹2,225.30
400x300, 4.2inch E-Ink display module, yellow/black/white three-color
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicatin..
₹3,559.00

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by