WiDo - Open Source IoT Node (Arduino Compatible)
Product Code: DFR0321
INTRODUCTION
Wido is an Arduino compatible WIFI IoT Node development board, which integrates with WG1300 WIFI solution. The microcontroller of Wido is ATMEL ATmega32U4.
Wido are compatible with copious amounts of Arduino and periphery modules. You can implement it on M2M Sensor Node development, Toys, Gaming, Smart Home Device and many other applications.
Como actualizar el firmware de Wido Node IoT, ejemplo de uso y revisión
(HOW TO UPDATE THE FIRMWARE OF WIDO NODE IOT, EXAMPLE OF USE AND REVISION)
SPECIFICATION
- Power Supply range: 5v or 7-12v
- Arduino Leonardo Compatible
- Integrate with WG1300 WIFI chip and support 2.4GHz IEEE 802.11 b/g network
- WIFi and MicroSD driven by SPI port
- On board 2.4G PCB Antenna
- Driver pins
- WIFI Module-D7(IRQ),D5(VBAT),D10(CS),D14(MISO),D15(SCK),D16(MOSI)
- MicroSD-D4(CS),D14(MISO),D15(SCK),D16(MOSI)
- User friendly Reset button
- Dimension: 72 mm x 55 mm(2.83" x 2.17")
DOCUMENTS
SHIPPING LIST
-
WiDo x1
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
-
₹789.00
© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta