Categories


Waspmote Smart Water Ions Kit

Product Code: CH-1009

Waspmote Smart Water Ions Kit
Brand: Cooking Hacks

Call Us
GST inclusive



Qty:

Availability: Discontinued


Add to Wish List



This product has been discontinued. It is replaced by Waspmote Smart Water Kit

 

Smart Water Ions Sensor Board

The Smart Water Ions Sensor Board has been designed to facilitate the measurement of the most important chemical parameters
that allow the remote monitoring of water quality in different scenarios, which includes contamination surveillance in natural
environments such as rivers and lakes, control of the appropriate conditions of water in pools or fish farms, agriculture,
hydroponics and observation of industrial sewage from industries.
The Smart Water Ions Sensor Board have four available sockets to connect any of the Ions Probes, and one specific socket for
the Reference Probe.
Every Smart Water Ions Sensor Board is provided with 5 BNC pigtail connectors and 1 Soil/Water Temperature Sensor (Pt-1000).

Specifications
Weight: 20 g
Dimensions: 73.5 x 51 x 1.3 mm
Temperature Range: [-20 ºC, 65 ºC]
Figure: Upper side

 Electrical Characteristics

Board Power Voltages: 3.3 V and 5 V
Sensor Power Voltages: The ions sensors are very sensitive and never must be connected to a power supply
Max. admitted current (continuous): 200 mA
Max. admitted current (peak): 400 mA

To get this Smart Water Ions Sensor Board find the below link

https://www.mgsuperlabs.co.in/estore/Smart-Water-Ions-Sensor-Board?search=CH-1011

 Sensors

Soil/Water Temperature sensor (Pt-1000)
 Measurement range: 0 ~ 100 ºC
 Accuracy: DIN EN 60751
Resistance (0 ºC): 1000 Ω
Diameter: 6 mm
Length: 40 mm
 Cable lenght: < 150 cm

 

You can find a complete example code for reading the temperature sensor in the following link:
http://www.libelium.com/development/waspmote/examples/swi-01-temperature-sensor-reading

 Reference probes
A reference electrode is an electrode which has a stable and well-known electrode potential. Reference electrodes are critical to
acquiring good electrochemical data. Drift in the reference electrode potential can cause quantitative and qualitative errors in
data collection and analysis beyond simple inaccuracies in the measured potential.
The Smart Water Ions Sensor Board have two different Reference Probes, depending on the ion to be measured.

To get this reference probe find the below link

For Single Junction Reference Probe

https://www.mgsuperlabs.co.in/estore/Single-Junction-Reference-Probe?search=CH-1013

For double Junction Reference Probe

https://www.mgsuperlabs.co.in/estore/Double-Junction-Reference-Probe?search=CH-1014

 

pH sensor (for Smart Water Ions)
The pH sensor integrated in the Smart Water Ions Sensor Board is specific to be used with this board and in combination with
one of the Reference Probes. This pH sensor cannot be used with Smart Water Sensor Board, which integrates another pH
sensor, different from the one exposed in this section.
• pH Range: 0-14
• Temp. Range (ºC): 5-60
• Internal Reference Type: Ag/AgCl
• Dimensions (mm): Ø12x160
• Reader accuracy: in function of calibration
• Cable length: < 64 cm

To get this pH sensor find the below link

https://www.mgsuperlabs.co.in/estore/pH-Sensor-Probe-(-for%20Smart-Water-Ions)?search=CH-1010

To get more information please find the below link

http://www.libelium.com/downloads/documentation/smart_water_ions_sensor_board.pdf

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by