Waspmote is an open source wireless sensor platform specially focused on the implementation of low consumption modes which allows the sensor nodes ("motes") to be completely autonomous, that is battery powered. Lifetime of Waspmote sensor nodes may go from 1 to 5 years depending on the duty cycle and the radio used.
Waspmote is based on a modular architecture. The idea is to integrate only the modules needed in each device optimizing costs. For this reason all the modules (radios, sensor boards, etc) plug in Waspmote through sockets.
This Kit includes the complete equipment for technology evaluation.
x4 Waspmote 802.15.4 PRO SMA 5 dBI (10mW for Europe and 63mW for International) |
x1 Gateway 802.15.4 PRO SMA 5 dBI (10mW for Europe and 63mW for International) |
x2 Temperature, Humidity and Pressure sensor |
x1 Events Board |
x1 Presence sensor (PIR) |
x1 Luminosity (luxes accuracy) sensor |
x1 Smart Cities Board PRO |
x1 O2 (Calibrated) Sensor |
x1 Ultrasound sensor (indoor) |
x1 Agriculture PRO Board |
x1 Soil temperature sensor |
x1 Soil moisture sensor |
x1 Solar radiation sensor |
x1 Weather Station WS-3000 (anemometer + wind vane + pluviometer) |
x1 Smart Water Board |
x1 Conductivity Sensor |
x1 Conductivity Calibration Kit K=1 |
x1 pH Sensor |
x1 pH Calibration Kit |
x1 4-20mA (Current Loop) board |
x1 RS-232 Serial / Modbus Module, DB9 Cable |
x1 GPRS Module |
x1 GPS Module |
x1 4G Module. (You must choose the version for your area: Europe, America, Australia and Brazil). |
x2 Expansion Radio Board Module |
x1 Bluetooth module for device discovery PRO 5 dBi |
x1 WiFi PRO Onchip |
x1 MicroSD 8 GB card pack (5 units) |
x4 6600 mA/h rechargeable battery |
x2 Rigid Solar Panel 7V – 500mA |
Documentation:
Waspmote Quick Tutorial
Waspmote Site
Waspmote Technical Guides
Sensor Boards Technical Guides
Networking Guides
Developers Forum
Videos
Articles
50 Applications with Waspmote
FAQ: Waspmote Vs. Arduino