USB WiFi (802.11b/g/n) Module with Antenna for Raspberry Pi

Make your Internet of Things device cable-free by adding super WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find ones that work well with the Pi and Bone without the need of recompiling any kernels: its supported by the Bone's Angstrom installation that comes with each Bone as well as the Adafruit Occidentalis distribution. You'll have wireless Internet in 10 minutes! Works great with 802.11b/g/n networks.

When you don't need the small size of our Miniature or Stick-size WiFi adapter, this guy has a massive antenna for greater range! Please note we have changed to an adapter that does not have a removable antenna

If using with a Beagle Bone: Because of the high power required by WiFi, a 5V 2A power adapter is required to power both the Bone and WiFi. Flaky behavior and crashes may result if this is not followed! We have a tutorial for using this module with the Beagle Bone!

If using with a Raspberry Pi: The latest Wheezy distributions support this module out-of-the-box. Also, the Adafruit Occidentalis distributionhas support built in. Check out our detailed tutorial for how to set up WiFi networking on the Pi You may find that you need to have a powered hub to use this adapter, so if you're having power flakiness with your Pi, try a hub!

TECHNICAL DETAILS

• RTL8192cu Chipset
• Antenna Length: 150mm / 5.9"
• Sticks out 48mm (1.9") beyond USB port
• Wireless Standards: IEEE 802.11n (draft), IEEE 802.11g, IEEE 802.11b
• Host Interface: High speed USB2.0/1.1 interface
• Data Rate: 802.11n: up to 150Mbps (downlink) and up to 150Mbps (uplink) , 802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback, 802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback
• Frequency Band: 2.4GHz ISM (Industrial Scientific Medical) Band/li>
• Chipset: Realtek
• RF Frequency: 2412 ~ 2462 MHz (North America), 2412 ~ 2472 MHz (Europe), 2412 ~ 2484 MHz (Japan)
• Radio Channel: 1 ~ 14 channels (Universal Domain Selection)
• Range Coverage: Up to 3 times farther range than 802.11g
• Antenna Type: Integrated Antenna
• Roaming: Full mobility and seamless roaming from cell to cell
• RF Output Power: 13 ~17 dBm (Typical)
• Modulation: 11n: BPSK, QPSK, 16QAM, 64QAM with OFDM, 11g: BPSK, QPSK, 16QAM, 64QAM, OFDM, 11b: DQPSK, DBPSK, DSSS, CCK
• Data Security: 64/128-bit WEP Encryption
• WPA, WPA-PSK, WPA2, WPA2-PSK. TKIP/AES
• Network: Auto-switch to use 802.11n or 802.11g or 802.11b mode
• Supports Ad-Hoc, Infrastructure WLAN network, Wireless roaming, Data rate auto fall-back under noisy environment or longer range distance, Site Survey with Profile function
• Configuration & Management: Plug-and-Play setup and installation, Management Utility supports 2000 / XP/ Vista
• Media Access Control CSMA/CA with ACK
• LED Indicator Link/Active ( Green )
• Operating Temperature 0°C to 40°C
• Storage Temperature -20°C to 75°C
• Operating Humidity 10% ~ 90% (Non Condensing)
• Storage Humidity 5% ~ 95% (Non Condensing)
• Regulatory Compliance RoHS Compliant, Wi-Fi Compliant
• Requirements Available USB 2.0 port