TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). Please see the TB67S279FTG Stepper Motor Driver Compact Carrier product page for more information about the driver.
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the TB67S279FTG Stepper Motor Driver Compact Carrier product page for more information about the driver.
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|
General specifications
| Motor driver: | TB67S279FTG |
|---|---|
| Minimum operating voltage: | 10 V |
| Maximum operating voltage: | 47 V |
| Continuous current per phase: | 1.1 A |
| Maximum current per phase: | 2 A |
| Minimum logic voltage: | 2 V |
| Maximum logic voltage: | 5.5 V |
| Microstep resolutions: | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Current limit control: | potentiometer |
| Reverse voltage protection?: | N |
| Header pins soldered?: | Y |
File downloads
-
TB67S279FTG datasheet (536k pdf)
- TB67S249FTG datasheet (533k pdf)
Enter the code in the box below: