OpenRB-150 Starter Kit

Product Code: ROBT 902-0184-000

Brand: Robotis Co. Ltd.

₹5,499.00

GST inclusive

Qty:

Availability: 1 In Stock

Add to Wish List

Features

* OpenRB-150 Starter Kit is a product consisting of OpenRB-150 and XL330-M288-T.

* Batteries, USB Cables, and Power Cables are not included.

OpenRB-150

Has the same pinout and form factor as the Arduino MKR, and supports programming using the Arduino IDE.

XL330-M288-T
Compact and lightweight DYNAMIXEL.

Supports RC protocol & 6 control modes including Current Control and Current Based Position Control.

Package Components

H/W Specifications

OpenRB-150

MCU	SAMD21 Cortex-M0+ 32bit low power ARM®
Operation Voltage	5.0V (USB 3.0) 3.7V ~ 12.6V (VIN or Terminal)
Operation Temperature	-40℃ ~ 85℃
Allowable Current	3.0A (DYNAMIXEL Port)
Connector Type	USB C-Type, Terminal Block
Dynamixel Port(TTL)	JST B3B-EH-A(2), JST S3B-EH-A(2) [Max 1Mbps]
Dimentions	66 x 25 mm
Weight	13g

XL330-M288-T

MCU		Cortex-M0+ (64 [MHz], 32bit)
Input Voltage	Min. [V]	3.7
	Recommended [V]	5.0
	Max. [V]	6.0
Performance Characteristics	Voltage [V]	5.0
	Stall Torque [N·m]	0.52
	Stall Current [A]	1.5
	No Load Speed [rpm]	104.0
	No Load Current [A]	0.15
Continuous Operation	Voltage [V]	-
	Torque [N·m]	-
	Speed [rpm]	-
	Current [A]	-
Resolution	Resolution [deg/pulse]	0.0879
	Step [pulse/rev]	4
	Angle [degree]	360
Position Sensor		Contactless absolute encoder (12Bit, 360 [deg]) Maker : ams(www.ams.com), Part No : AS5601
Operating Temperature	Min. [°C]	-5
Operating Temperature	Max. [°C]	60
Motor		Cored
Baud Rate	Min. [bps]	9,600
Baud Rate	Max. [bps]	4,000,000
Control Algorithm		PID
Gear Type		Spur
Gear Material		Engineering Plastic
Case Material		Engineering Plastic
Dimensions (WⅹHⅹD) [mm]		20 X 34 X 26
Dimensions (WⅹHⅹD) [inch]		0.78 X 1.33 X 1.02
Weight [g]		18.00
Weight [oz]		0.63
Gear Ratio		288.4 : 1
Command Signal		Digital Packet
Protocol Type		Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical)		TTL Level Multi Drop Bus
ID		0 ~ 252
Feedback		Position, Velocity, Current, Realtime tick, Trajectory, Temperature, Input Voltage, etc
Protocol Type		Protocol 2.0 Experimental S.BUS Experimental iBUS RC-PWM
Operating Mode / Angle		Current Control mode：Endless turn Velocity Control mode：Endless turn Position Control Mode：360 [deg Extended Position Control Mode：±256 [rev] Current-based Position Control Mode：±256 [rev] PWM Control Mode：Endless turn
Output [W]		-
Standby Current [mA]		15

How to Supply Power (3 Methods)

Power can be supplied to the OpenRB-150 in three ways depending on the voltage and serial communication type of DYNAMIXEL.

1. 5V TTL DYNAMIXEL

2. 12V TTL DYNAMIXEL

3. 12V RS-485 DYNAMIXEL

Compatible DYNAMIXEL

The OpenRB-150 is compatible with all DYNAMIXEL models.

However, additional equipment is required for use with the following types of DYNAMIXEL.

1. RS-485
The DYNAMIXEL Communication Bridge is required to convert signals.

2. 24V

A separate power supply is required.

3. DYNAMIXEL-AX and MX Series (Molex connectors)

A Molex-JST convertible cable is required.

Caution

1. The Arduino MKR board is not included in the package.

2. When supplying power, please check the jumper settings. (USB C Type, VIN, Terminal VIN)

3. Please do not charge the battery when it is connected to the controller.

4. Please check the power input terminal before connecting it to the controller.

Links

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Enter the code in the box below:

Continue

Tags: OpenRB-150 Starter Kit, OpenRB-150, ROBT 902-0184-000,

Designed with by Ish Gupta