Radiation Geiger Kit

The Radiation Geiger Kit allows the user to measure radiation levels from specific places using our Radiation Sensor Board. 
You can use all the components from the Starter Kit, and following our tutorials you will be able to display radiation levels and amount of light in the LCD display, use a servo as an analog meter or represent radiation levels with an RGB LED.

The Radiation Geiger Kit includes:

• 1x RADIATION SENSOR BOARD FOR ARDUINO, RASPBERRY PI AND INTEL GALILEO
• 1x GEIGER TUBE
• 1x VASELINE GLASS BEAD
• 1x Starter Kit
  • 1x Starter Kit Box
  • 1x "Starter Kit" Sticker
  • 1x Arduino Jumper Cables
  • 1x Breadboard clear
  • 20x Resistor 1/4W 5% 220 ohm
  • 10x Resistor 1/4W 5% 100 ohm
  • 10x Resistor 1/4W 5% 10 K
  • 10x Resistor 1/4W 5% 4,7 K
  • 10x Resistor 1/4W 5% 1 M
  • 2x Potentiometer 10K
  • 4x Push Button 12x12 B3F-4150
  • 1x Temperature Sensor (MCP9700)
  • 10x 5mm Red Led
  • 10x 5mm Green Led
  • 1x 9v To Barrel Jack Adapter
  • 1x LDR Sensor
  • 4x Sugus
  • 1x Piezo Speaker (ref.10066)
  • 1x 5mm Triple Output Led RGB (Common Anode)
  • 1x 9G Micro Servo
  • 1x Hobby Motor
  • 1x LCD 16*2 Characters - Green Yellow back light
  • 1x Transistor BC547CG