PhidgetEncoder HighSpeed 4-Input
Description
Read up to four encoders simultaneously with this Phidget. Includes 4 digital inputs for reading limit switches.
The PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature output type, indicating that there will be two quadrature output channels (usually labeled A and B) and an optional third output channel to signal when the index pin (a reference point for zero position or a complete revolution) has been reached.
The PhidgetEncoder Highspeed 4-Input is able to read four encoders simultaneously. Encoders are not powered up until all initialization of the device is complete. It is possible to enable some or all encoders, depending on how many of the channels are being used. This can also be used to reduce power consumption when certain encoders are not needed.
The PhidgetEncoder Highspeed 4-Input has the added ability to time the duration between a group of quadrature changes. The time is returned in microseconds. This time value can be used to calculate velocity and acceleration.
Both mechanical and optical encoders are available, with optical encoders dominating at > 100 counts per second. Review the data sheet for the encoder you are planning to use to ensure it is compatible with the PhidgetEncoder Highspeed 4-Input. Almost any incremental quadrature encoder will work but it is important to verify this before connecting it to the Phidget. Absolute encoders will not work with this device. Ideally, you should choose a quadrature encoder with a 5-pin output and the following pinout in order to be directly compatible with the 1047.
This particular revision of the 1047 has improved power switches to enhance system stability when turning off and on separate encoder inputs. It also has updated firmware with a few minor bug fixes.
Product Specifications
| Encoder Interface | |
|---|---|
| API Object Name | Encoder |
| Number of Encoder Inputs | 4 |
| Count Rate Max | 1E+06 pulses/s |
| Encoder Interface Resolution | x4 |
| Update Rate | 125 samples/s |
| Time Resolution | 1 μs |
| Encoder Input Low Voltage Max | 800 mV DC |
| Encoder Input High Voltage Min | 2.1 V DC |
| USB Speed | Full Speed |
| Board | |
| Controlled By | USB (Mini-USB) |
| API Object Name | Encoder |
| Electrical Properties | |
| Encoder Pull-up Resistance | 10 kΩ |
| Current Consumption Max | 470 mA |
| Current Consumption Max (per encoder) | 200 mA |
| Current Consumption Min | 30 mA |
| USB Voltage Min | 4.8 V DC |
| USB Voltage Max | 5.3 V DC |
| Physical Properties | |
| Recommended Wire Size | 16 - 26 AWG |
| Operating Temperature Min | 0 °C |
| Operating Temperature Max | 70 °C |
| Digital Inputs | |
| Number of Digital Inputs | 4 |
| Pull-up Resistance | 15 kΩ |
| Low Voltage Max (True) | 800 mV DC |
| High Voltage Min (False) | 2.1 V DC |
| Low Voltage Trigger Length Min | 4 ms |
| High Voltage Trigger Length Min | 16 ms |
| Digital Input Voltage Max | ± 15 V DC |
| Digital Input Update Rate | 125 samples/s |
Documents
Library & Driver Downloads
Enter the code in the box below: