The Pmod BT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for updating the RN-42 firmware if needed.
Add wireless capability with this low power, Class 2 Bluetooth radio
Supports HID profile for making accessories such as pointing devices, etc.
Secure communications, 128-bit encryption
Six different modes
Small PCB size for flexible designs 1.5“ × 0.8” (3.8 cm × 2.0 cm)
12-pin Pmod connector with UART interface
For all other material: