PhidgetBridge 4-Input
Product Code: Phidgets 1046_0
This Product has been Replaced by newer version of Phidgets-1046_0
The PhidgetBridge lets you connect up to 4 un-amplified Wheatstone bridges, such as:
- strain gauges
- compression load cells
- pressure sensors/Barometers
- piezoresistive accelerometers
- Magnetoresistive sensors (Compasses)
The data rate and gain values can be configured in software.
Product Specifications
Board
| API Object Name | Bridge |
| Number of Bridge Inputs | 4 |
| Bridge Data Rate Min | * 8 ms |
| Bridge Data Rate Max | 1000 ms |
| Bridge Input Current Max | ± 3 nA |
| Differential Voltage Resolution | 24 bit |
Electrical Properties
| USB Voltage Min | 4.5 V DC |
| USB Voltage Max | 5.3 V DC |
| USB Speed | Full Speed |
| Current Consumption Min | 35 mA |
| Current Consumption Max | 500 mA |
| Available External Current | 465 mA |
| Input Voltage Limit Min | Ground + 0.25V DC |
| Input Voltage Limit Max | 5V Supply - 0.25V DC |
Physical Properties
| Recommended Wire Size | 16 - 26 AWG |
| Operating Temperature Min | 0 °C |
| Operating Temperature Max | 70 °C |
*The minimum data rate is 8ms though the board has a maximum sample rate of 122 samples a second (slightly less than the 125 an 8ms rate would have you believe).
Resources
- User Guide
- How to connect RTDs to the 1046
- Mechanical Drawings
- Download 3D Step File
- Programming Resources
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta