The Boron GSM is a powerful 2G/3G enabled development kit that can act as either a standalone cellular endpoint or 2G/3G enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.
The Boron is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints where Wi-Fi is missing or unreliable.
All Particle hardware is designed from the ground up to work with the Device Cloud; a powerful set of tools and infrastructure to build, connect, and manage your IoT fleet. The Device Cloud for Particle Mesh is priced by network. All Particle customers get 3 free months of Device Cloud access for micro networks using a cellular gateway. A micro network is defined as a network with 10 total devices and a single gateway. Please refer to our pricing documentation for more information.
Contents
Boron 2G/3G dev board (On-board SIM, no card necessary)
Mini breadboard
Cellular flex antenna
1800mAh Li-Po battery
USB cable
Starter project includes two resistors (220 ohm), one red LED, and one photodiode
Specs
u-blox SARA U201 2G/3G modem
HSPA/GSMqq with global hardware and SIM support
3GPP Release 7
Bands 800/850/900/1900/2100 MHz
Nordic Semiconductor nRF52840 SoC
ARM Cortex-M4F 32-bit processor @ 64MHz
1MB flash, 256KB RAM
IEEE 802.15.4-2006: 250 Kbps
Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps
Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations
ARM TrustZone CryptoCell-310 Cryptographic and security module
Up to +8 dBm TX power (down to -20 dBm in 4 dB steps)
NFC-A tag
On-board additional 2MB SPI flash
20 mixed signal GPIO (6 x Analog, 4 x PWM), UART, I2C, SPI
Micro USB 2.0 full speed (12 Mbps)
Integrated Li-Po charging and battery connector
JTAG (SWD) Connector
RGB status LED
Reset and Mode buttons
Dual SIM support: nano 4FF and MFF2
U.FL connector for external antenna
Meet the Feather specification in dimensions and pinout
This item is not in stock. If you would like to order the item now, add it to your cart and check out when you're ready. We will charge you and ship your order as soon as it becomes available. This will guarantee that you get placed into the order queue and stock will be set aside for your order.
Backordered items may require additional shipping charges. Please see our Backorder Policy for more information. Most items ship within 2-3 weeks. Some items have extended lead times.