Legacy Universal 1-Channel SPDT Relay Controller
NCD Low-Cost Universal Relay Controllers
Whether you are looking for wireless or USB relay control, NCD universal relay controllers feature a no-frills design that supports relay on, off, and relay status commands. NCD Universal relay controllers communicate any of our communications modules that operate at 9600 baud. This relay controller features a 1-Channel 5-Amp or 10-Amp SPDT Relay with relay status LED. Power this controller using 12VDC from the 2.1mm barrel connector or the 2-wire terminal block.
Universal Interface
This Low-Cost relay controller features a modular communications interface supporting most of today’s most popular communication technologies. Choose your favorite technology now, change it later as your needs change.
Choose a USB interface for basic USB relay control using a virtual COM port communicating at 9600 baud.
Choose a Serial interface for RS-232 relay control operations at 9600 baud.
Choose a Bluetooth interface for Bluetooth relay control applications using the Virtual COM Port Driver stack.
Choose a ZigBee, 900HP-S3B, 802.15.4 interface for Wireless relay control. These options require an external that communicate to the USB port of your computer.
Choose from any of the following communication modules:
802.15.4 Long-Range Wireless
Use 802.15.4 Communications if you require industrial strength long-range wireless communications. 802.15.4 is a point-to-point wireless standard, allowing fast communications. The wireless protocol acts as a long-distance wireless serial port, allowing wireless operation with no modification to software.
900HP-S3B Industrial Wireless Mesh
Long-Range Wireless Mesh networking is our favorite of all wireless communication technologies. This communication module will hop data from one location to another to reach its intended destination. Data hopping is a integrated feature of this communication technology, users do not need to do anything other than make sure wireless modules stay within hopping range of each other. We use the Digi 900HP-S3B module in our products, as this is the best the industry has to offer. With a 2 mile range between modules and up to 8 hops, it is possible to cover 16 miles of wireless territory using this technology. Using high-gain antennas, this module is capable of communicating to a remote module up to 28 miles away.
RS-232 Serial
NCD RS-232 Serial Communication modules make it easy to integrate the worlds most prolific communication standard. Easily interface to desktop PCs and laptops for easy control via standard serial commands. Most NCD devices typically default to 115.2K Baud; however, older low-cost devices implement 9600 baud data rate as the predominate standard.
USB
Our USB interface module makes it easy to control our devices using the USB port. Simply plug into any available USB port and start controlling our devices using standard serial commands. NCD USB Interface modules feature genuine FTDI USB to Serial Converter Chips, the very best in the industry.
ZigBee® Wireless
ZigBee® wireless communications is a popular standard among our customers. The wireless protocol acts as a long-distance wireless serial port, allowing wireless operation with no modification to software.
10-Amp SPDT Relay Option
This controller is available with a 10-Amp relay option, allowing control of higher-power loads up to an absolute maximum of 240VAC at 10 Amps. Ideal for general purpose switching applications, this relays is focused on power-switching, and should never be used for low-power signals due to a higher On resistance of up to 150 Ohms when relay contacts are new (contact resistance drops to less than 1 Ohm after break-in period). The 10-Amp relay is of the SPDT variety, which provides Common (C), Normally Open (NO), and Normally Closed (NC) connections. Common is connected to NC when the relay is off. Common disconnects from NC and connects to NO when the relay is activated. All connections are made via screw terminals, capable of accepting up to 12 AWG wire.
5-Amp SPDT Relay Option
This controller is available with a 5-Amp relay option, allowing control of higher-power loads up to an absolute maximum of 240VAC at 5 Amps. Ideal for general purpose switching applications, this relays is focused on power-switching, and should never be used for low-power signals due to a higher On resistance of up to 150 Ohms when relay contacts are new (contact resistance drops to less than 1 Ohm after break-in period). The 5-Amp relay is of the SPDT variety, which provides Common (C), Normally Open (NO), and Normally Closed (NC) connections. Common is connected to NC when the relay is off. Common disconnects from NC and connects to NO when the relay is activated. All connections are made via screw terminals, capable of accepting up to 12 AWG wire.
Features
- Universal Low-Cost Relay Controller with Modular Interface
- One 5-Amp NAIS or 10-Amp Omron SPDT General Purpose Relay
- Supports USB, Bluetooth, RS-232, and Industrial Wireless Modules
- Wireless Interface Mounts as a Virtual COM Port on your PC over USB
- Easy Programming and 100% Compatibility Across ALL Operating Systems
- Turn Relay On or Off or Read Relay Status using 2-Way Communications
- Features LEDs indicates Relay Status & Overkill Transistor Drivers
- Convenient Terminal Blocks for Easy Connection
- No-Click Power-up & 2-Way Communication Capable
Enter the code in the box below: