Clicker 2 for Kinetis

Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for Kinetis features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).

Thousands of possibilities with click boards

With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 200 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away.

Programming

To make your prototyping experience as convenient as possible, clicker 2 for Kinetis is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware. On-board mikroProg for Kinetis connector enables programming through external programmer/debugger.

Power Management

clicker 2 for Kinetis features LTC®3586, a highly integrated power management and battery charger IC that includes a current limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection.

You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.

Specification

Downloads

 clicker 2 for Kinetis bootloader

 clicker 2 for Kinetis Examples

 mikroProg suite for ARM v150