XDP™ OTP Production Burner for SMPS
XDP™ OTP Production Burner for SMPS is a specialized tool for programming Infineon's XDP™ Switching Mode Power Supply ICs (SMPS) from DP2A and DP2B families. The device is designed for two types of users: experts (engineers who conduct the initial configuration) and operators (production line employees who carry out the programming). The programming process varies depending on the type of target device. For DP2B-based ICs it consists of three distinct operations that can be performed on target devices:
- 1. Firmware programming
- 2. Patching
- 3. Partial or full set parameter configuration
For DP2A-based devices, it is only possible to update a full set of parameters.
Having four separate channels, the XDP™ OTP Burner can be used to program up to four SMPS ICs at once (enabling a single production line employee to program a large volume of target devices efficiently).
Supported devices
How it works
The XDP™ OTP Burner programs target devices from configuration files stored in its internal Flash memory, or external storage (MicroSD card). These configuration files (that can contain a firmware update, patch or parameter set) are prepared with a dedicated PC application.
Once the configuration files have been prepared, the XDP™ OTP Burner can be used as a standalone device.
About XDP™
Infineon's line of XDP™ Switching Mode Power Supply ICs represent the first all-in-one package solution that integrates a digital power controller with key peripherals. They enable higher energy efficiency, shorter development cycles, lower cost, and more flexibility. For more information, see the page about XDP™ on Infineon's website.
XDP™ OTP Burner setup
Click here to download the latest version of the XDP™ OTP Burner software.
Key features
- Four IDC8 connectors for target devices
- USB port for connecting to PC
- 9V DC power jack
- User interface for standalone use: 7x signal LEDs and 2x Pushbuttons
- External storage with Micro SD card slot
- Dedicated PC application for preparing configuration files
- Upgradable firmware (USB-HID bootloader inside)
Customer support
MikroElektronika provides up to two hours (per purchased device) of free technical support for the XDP™ OTP Burner via Skype. This support relates chiefly to questions on how to integrate the device into a production line.
Package contains
- XDP™ OTP Production Burner for SMPS
- Power Supply Unit w/ AC plug W2E (Europe)
- USB Cable (Type A - Type B plugs)
- MicroSD card 4GB
- Quick start guide flyer
Note: IDC8 cables and mechanical setup for connecting to target devices are NOT supplied in the packaging.
Technical specifications
- USB Supply (safe side): 5V max. 400mA
- DC Jack Supply (safe side): 9V max. 800mA
- Safe and galvanic isolation from XDP OTP Burner board to low voltage side (USB and 9V DC Power Jack)
- Isolation Voltage 5000Vrms for 1 Min
- Maximum voltage swing output (unsafe side) - Target 5 – 26V
- Operating voltage (unsafe side) - Target 7.5V(typ.)
- Tolerance for Vout @7.5V ± 50mV
- Maximum ambiance temperature 40ºC
- CE certified
Note: IDC8 cables and mechanical setup for connecting to target devices are NOT supplied in the packaging.
Specification
| Applications | Specialized tool for programming Infineon's XDP™ Switching Mode Power Supply ICs (SMPS) |
| Key Features | Four IDC8 connectors for target devices, USB port for connecting to PC |
| Key Benefits | External storage with Micro SD card slot, Upgradable firmware (USB-HID bootloader inside) |
| Interface | USB |
Downloads
XDP™ OTP Production Burner User Manual
XDP™ OTP Production Burner Quick Start Guide
XDP™ OTP Production Burner Quick Start Guide - Chinese version
Enter the code in the box below: