This board based on the latest SIMCOM SIM808 GSM/GPS module, it offers cellular GSM and GPRS data along with GPS technology for satellite navigation.
The board features ultra-low power consumption in sleep mode, giving the project incredibly long standby times. Furthermore there's an on-board battery charging circuit that can be used with LiPo batteries.
The GPS receiver is incredibly sensitive with 22 tracking and 66 acquisition channels, and also supports assisted-GPS (A-GPS) for indoor localisation.
The board is controlled by AT command via UART and supports 3.3V and 5V logical level. It comes with a mini GPS and GSM antenna, however a battery is optional. The board uses the 2G (not 3G or LTE) GSM networks.
Features:
Technical Details
Dimensions | 90mm x 128mm x 7mm |
Battery | Exclude |
Receiver channels | 22 tracking / 66 acquisition |
Coarse/Acquisition code | GPS L1 |
Tracking sensitivity | -165dBm |
Cold start time | 30s (typ.) |
Hot start time | 1s (typ.) |
Warm start time | 28s (typ.) |
Horizontal position accuracy | < 2.5m CEP |
Power consumption - Acquisition | 42mA |
Power consumption - Continuous tracking | 24mA |
Update rate | 5Hz |
Part List
LoNet 808 - Mini GSM/GPRS + GPS Breakout | 1 |
mini GPS passive antenna | 1 |
GSM antenna | 1 |
Documents