LEM click

DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON!

Note: LEM click has exposed pins/pads. To stay safe take precaution when applying high voltage to the click. The click is to be used by trained personnel only when applying high voltage.

LTS 6-NP features

LTS 6-NP is a closed loop (compensated) multi-range current transducer using the Hall effect.

Intended for electronic measurement of currents: DC, AC, pulsed, mixed with galvanic separation between the primary circuit and the secondary circuit.

How it works

The conductor can be placed through the hole on the sensor:



There is on board ADC to read out the analog output value of the sensor, or it can be read from the AN pin.

MCP3201 A/D converter

The MCP3201 is a 12-bit Analog-to-Digital (A/D) Converter with on-board sample and hold circuitry. The device provides a single pseudo-differential input.

The MCP3201 is capable of sample rates of up to 100 ksps at a clock rate of 1.6 MHz.

Key features

• LTS 6-NP current transducer
  • Unipolar voltage supply
  • Incorporated measuring resistance
  • Low temperature drift
  • Optimized response time
• MCP3201 ADC converter
• SPI interface
• 3.3V or 5V power supply

Downloads

 mikroBUS™ Standard specification 

 LTS 6-NP datasheet

 LibStock: LEM click library 

 LEM click schematic