Description
Step 1: Buy the C2000 MCU F28027 LaunchPad
Step 2: Step 2: Follow the get started section
LAUNCHXL-F28027 is a low cost evaluation and development tool for the F2802x series in the TI MCU LaunchPad ecosystem which is compatible with various plug-on BoosterPacks. The LaunchPad provides a standardized and easy to use platform to use while developing your next application.
Features
Hardware features
USB connected isolated XDS100 JTAG debug probe for real-time debug and flash programming
2x 20-pin headers/connectors with access to all device pins
Programmable buttons and LEDs
Superset TMS320F28027: 60 MHz C28x CPU, 64 KB Flash, 8 PWM Channels, 12-bit ADC, capture interface, UART, SPI, and more
Hardware Files are in C2000Ware at boards\LaunchPads\LAUNCHXL_F28027
Software Features
Free download of Code Composer Studio IDE
Free download of controlSUITE for device drivers and example projects
MathWorks Embedded Target Support
Get started
Install Code Composer Studio IDE and controlSUITE
Connect the LaunchPad using the included mini-USB cable to a computer
Open a serial terminal program of your choice (Putty, HyperTerm, etc.) and configure it to access the LaunchPad virtual COM port with 115200 Baud, 8-bit data, No parity, and single stop Bit. The COM port number can be found by opening your computer’s Device Manager
Ensure that the XDS200v2’s second port is a serial port. Refer to the XDS100 Wiki for the configuration details
Ensure that S4 is in the UP position to enabled the USB<->UART channel
When connected to your computer, the device’s internal temperature sensor is sampled to establish a reference temperature and GPIO3 LED is lit in the nibble wide LED display (8 in hexadecimal)
Any increase or decrease in temperature is displayed as an increment or decrement of this binary display
The serial terminal will display the latest temperature reading
Build and load other examples in controlSUITE
Ask questions on the TI C2000 e2e forum
What's Included
Piccolo F28027 LaunchPad
Mini USB Cable