Grove - Multichannel Gas Sensor
Product Code: Seeed 101020088
How to choose a gas sensor ?
Grove – Multichannel Gas sensor is a environment detecting sensor with a built in MiCS-6814 which can detect many unhealthy gases. 3 gases can be measured simultaneously due to its three channels, so it can help you to monitor the concentration of more than one gas.
This sensor belongs to the Grove system, and you can plug it onto the Base shield and work with Arduino directly without any jumper wires. The interface is I2C, so plug it onto the I2C port of Base shield, then you can start to work on it.
Features
-
Three fully independent sensing elements on one package
-
Built with ATmega168PA
-
I2C interface with programmable address
-
Heating power can be shut down for low power
-
Detectable gases:Carbon monoxide (CO) , Nitrogen dioxide (NO2) , Hydrogen (H2) , Ammonia (NH3) , Methane (CH4) , etc.
Technical Details
| Dimensions | 89mm x 140mm x 6.8mm |
| Battery | Exclude |
| Voltage | 3.1~ 5.25V |
| Ripple(@Max Power) | 80~100mV |
| Max Heating Power | 88mW |
| Max Power | 150mW |
| ADC Precision | 10Bits |
| I2C Rate | 100kHz |
| VIL(@I2C) | -0.5~0.99V |
| VIH(@I2C) | 2.31~5.2V |
Part List
| Grove – Multichannel Gas Sensor | 1 |
| 26AWG Grove Cable | 1 |
Documents
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
-
₹89.00
© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta