Categories


Reach M+

Product Code: EM-RCH101

Reach M+
Reach M+
Reach M+
Reach M+
Reach M+
Brand: Emlid

Available Options

Reach M+:






₹34,189.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



RTK positioning for navigation

Reach calculates real-time coordinates with centimeter accuracy
and streams them in NMEA or binary format to your device
over UART, Bluetooth or Wi-Fi.

PPK for UAV mapping.
Centimeter accuracy without GCP

Reach module logs precise tracks and the exact moment
when each photo is taken.

 

Why camera synchronization is so important?

Usually autopilot triggers the camera and records the coordinate it has at the moment.

When the drone is flying at 20m/s and GPS works at 5Hz, that means your autopilot will have position readings only each 4m.

While enough for navigation such readings are not suitable for precise georeferencing.

Also, there is always a delay between the trigger and the actual moment the photo is taken.

Reach module solves this by directly connecting to the camera hot shoe port which is synced to the shutter.

The time of each photo is logged with a resolution of less than a microsecond.

 

 

 

 

 

 

 

                                                                                             

 

Connect Reach to a hot shoe port on a camera                                                                     Fly a drone, Reach will record photo events 

Every time a photo is taken camera produces a pulse on a flash                                               Reach captures flash sync pulses with sub-microsecond resolution and     

hot-shoe connector which is synced to a shutter opening.                                                          stores them in a raw data RINEX log in internal memory.

 

 

                                                                       

 

Download logs from Reach and base station                                                                         Process logs and get a file with geotags of photos                                       

After the   flight get the RINEX logs from your airborne Reach                                                    Process RINEX files using the free RTKLIB software. 

module and a base station (Reach RS, CORS or other receiver).                                              Produced file with precise coordinates of the photos can be used for                                                                                                                                                                   georeferencing.

 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: Reach, M+, EM, RCH101,

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by