Eclypse Z7: Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion and two Zmod ADCs

Product Code: DG 471-036-1

Brand: Digilent

0 reviews | Write a review

₹69,729.00

GST inclusive

Qty:

Availability: Backorder

Add to Wish List

Description
Reviews (0)

Overview

The Eclypse Z7 is specifically designed to enable the rapid prototyping and development of embedded measurement systems. Featuring high-speed Zmod ports for modular expansion and a Xilinx Zynq®-7020 SoC, the Eclypse Z7 is fast and flexible, reducing the time it takes for engineers and researchers to develop innovative and powerful new high-speed instrumentation, control, and measurement systems for edge-computing, medical, and communications applications. The Eclypse Z7 is the first host board of the Eclypse Platform.

Zmod Expansion

Zmod is Digilent’s new expansion solution using the open-source SYZYGY standard from Opal Kelly. Faster than the Pmod Standard and more compact and cost-effective than FMC, Zmods improve the customizability options for high-speed I/O. Plug in your application specific Zmods and get up and running in hours or days, instead of weeks or months. Zmods available from Digilent can be found here.

Eclypse Platform Software

The Eclypse Z7 is a component of the Eclypse Platform, which pairs Digilent’s open software API with Digilent’s novel Eclypse hardware. Pre-built Linux images are accompanied by the API, and Petalinux is supported to build and deploy custom Embedded Linux solutions. This system allows users to plug in their Zmods of choice and get started prototyping new measurement, instrumentation, and control systems without directly interfacing with the FPGA until desired. With this system, embedded Linux developers can leverage the power of FPGA without possessing hardware expertise. Currently, C and C++ are supported, with plans to add support for other programming languages in the future.

Guides and demos are available to help you get started quickly with the Eclypse Z7. These can be found through the Support Materials tab.

Features:

Features
Zynq-7000 APSoC	Chip number: XC7Z020-1CLG484C 667 MHz dual-core Cortex-A9 processor DDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C Programmable from JTAG, Quad-SPI flash, and microSD card Programmable logic equivalent to Artix-7 FPGA
Memory	1 GiB DDR3L with 32-bit bus @ 1066 MT/s 16 MB Quad-SPI Flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48/64™ compatible identifier microSD card slot
Power	Powered from external 12V 5A supply Platform MCU for configuration of adjustable power supplies and temperature management
USB and Ethernet	Gigabit Ethernet PHY USB-JTAG programming circuitry USB-UART bridge USB micro AB port with USB 2.0 PHY with Host/Device/OTG capabilities
Zmod Ports	2 ports following the SYZYGY Standard interface specification Compatible with a variety of SYZYGY pods, allowing for a wide variety of applications Dedicated differential clocks for input and output 8 differential I/Os per port 16 single-ended I/Os per port DNA interfaces connected to Platform MCU allowing for various auto-negotiated power supply configurations
Pmod Ports	2 twelve-pin ports for a total of 16 FPGA-connected I/Os High speed voltage translation and protection circuitry
User GPIO	2 push-buttons 2 RGB LEDs
Product Compliance	HTC: 8471500150 ECCN: 4A994.b

Included:

Eclypse Z7 Development Board
FPGA fan
USB A to Micro B programming cable
USB A to Micro A cable
12V 5A power supply
Digilent custom packaging
Adding two Zmod ADCs

Support Materials

Reference Manual

Schematics (PDF)

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Enter the code in the box below:

Continue

Tags: Eclypse, Z7, Zynq, 7000, SoC, Development, Board, with, SYZYGY, compatible, Expansion, and, two, Zmod, ADCs, Digilent, DG, 471-036-1, 471, 036, 1,

Designed with by Ish Gupta