Categories


EasyPIC PRO v7

Product Code: MIKROE-995

EasyPIC PRO v7
EasyPIC PRO v7
EasyPIC PRO v7

₹17,749.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



EasyPIC PRO™ v7 Development System

EasyPIC PRO™ v7 is a full-featured development board for high pin-count 8-bit PIC® microntrollers. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, Temperature measurement and other. On-board mikroProg™ programmer and debugger supports over 155 PIC® microcontrollers. Board is delivered with MCU socket containing PIC18F87K22 microntroller.

easypic pro v7

mikroProg™ with mikroICD™`

mikroProg™ is a fast USB 2.0 programmer with mikroICD™ hardware In-Circuit Debugger. Smart engineering allows mikroProg™ to support PIC18F, PIC18FJ and PIC18FK devices in a single programmer! It supports over 155 microcontrollers from Microchip. Outstanding performance and easy operation are among it’s top features.

mikroprog for easypic pro v7

The mikroICD™ debugger enables you to execute your program on the host PIC microcontroller and view variable values, Special Function Registers (SFR), RAM, CODE and EEPROM memory along with the code execution on hardware. Whether you are a beginner, or a professional, this powerful tool with convenient set of commands will enable you to track down bugs quickly. mikroICD™ is one of the fastest, and most reliable debugging tools on the market.

MCU card

Standard 80-pin MCU card with PIC18F87K22 is included in the package with the board. It's also sold separately, if you'd like a spare one to integrate into your own hardware or for any other reason.

easypic pro v7 mcu card fronteasypic pro v7 mcu card back

Modules

Ethernet on-board

ethernet on-board

Ethernet connector (RJ-45) allows you to develop ethernet applications.

UART

uart

Write UART applications for laptops too. Besides RS-232, we also added USB-UART.

Output

output

We added additional screw terminals with output 5V and 3.3V power supply.

GND

gnd

We added three additional GND pins for easier access of your oscilloscope probes.

Display socket

Display

Special plastic GLCD and LCD holders make sure that your displays securely fit in place.

Power

Display

Dual switching power supply allows the board to support boath 3.3V and 5V devices.

mikroBUS™ sockets

mikrobus

With three mikroBUS™ sockets you can add dozens of new functionality to your board with minimum hardware adjustments. Collection of mikroBUS™ compatible Click Boards is growing rapidly, and we have designed them with great care, so you don’t have to make any complicated settings. Just plug your board in, and you are good to go.

Package Contains

  • Damage resistant protective box
  • EasyPIC PRO™ v7 board in antistatic bag
  • USB cable
  • User Manual and Board Schematic

Specification

Applications Developing and testing firmware, creating prototypes, learning embedded programming
Displays Support for 2 x16 Character LCD and Graphic LCD with Touch Screen
Touch Screen Resistive
Architecture PIC (8-bit)
On-board modules Sockets for LM35 and DS1820 temperature sensors, ADC Potentiometers, Touch panel controller with connector
Programming On-board mikroProg for PIC. IDC2/IDC3 connector available for connecting external programmer
Storage On-board EEPROM (1024 Bytes)
Sound and Audio Piezo buzzer
Expandability 3 x mikroBUS sockets, 2 x IDC10 headers for each PORT
Integration Mounting holes
Input Voltage 5V (via USB) or 9-32V AC, 7-23V DC (via adapter)

Downloads

 Drivers for mikroProg Suite

 mikroProg Suite for PIC User Manual

 mikroProg - mikroICD User Manual

 EasyPIC PRO v7 User Manual

 EasyPIC PRO v7 Schematic

 EasyPIC PRO v7 Examples v100

 mikroProg Suite for PIC v250

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: EasyPIC, PRO, v7, MIKROE, 995,

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by