ESP32-S2-DevKitM-1 Development Board

Product Code: DFR0813

Brand: DF Robot

0 reviews | Write a review

₹1,439.00

GST inclusive

Qty:

Availability: Backorder

Add to Wish List

INTRODUCTION

ESP32-S2-DevKitM-1 is an entry-level development board equipped with ESP32-S2-MINI-1 module. Most of the I/O pins on the module are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount the development board on a breadboard.

ESP32-S2-MINI-1 is a generic Wi-Fi MCU module that integrates ESP32-S2FH4 chip. ESP32-S2-MINI-1 comes with a PCB antenna and features a 4 MB SPI flash.

Description of Components

ESP32-S2-DevKitM-1 Development Board Description of Components

Key Component	Description
ESP32-S2-MINI-1	ESP32-S2-MINI-1 is a generic Wi-Fi MCU module that integrates ESP32-S2FH4 chip. ESP32-S2-MINI-1 comes with a PCB antenna. And the module features a 4 MB SPI flash.
3.3 V Power On LED	Turns on when the USB power is connected to the board.
USB to UART Bridge	Single USB-UART bridge chip provides transfer rates up to 3 Mbps.
I/O Connector	All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board. Users can program ESP32-S2FH4 chip to enable multiple functions such as SPI, I2S, UART, 12C, touch sensors, PWM etc. For details, please check the table below.
Reset Button	Reset Button.
Micro-USB Port	USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-S2FH4 chip.
Boot Button	Download button. Holding down Boot and then pressing Reset initiates firmware Download mode for downloading firmware through the serial port.
RGB LED	Addressable RGB LED (WS2812), driven by GPIO18.
5V to 3.3V LDO	Power regulator that converts a 5 V supply into a 3.3 V output.

Pin Header

The tables below provide the Name and Function of I/O header pins on both sides of the board, the numbering and names are the same as in the schematics in the picture above.

J1 J2

ESP32-S2-DevKitM-1 Development Board Pin Header

SPECIFICATION

ESP32-S2FH4 chip, Xtensa single-core 32-bit LX7 microprocessor
128 KB ROM
320 KB SRAM
16 KB RTC SRAM
40 MHz crystal oscillator
4 MB SPI flash
Operating Voltage/Power supply: 3.0~3.6 V
Operating Temperature Range: –40~85°C

DOCUMENTS

SHIPPING LIST

ESP32-S2-DevKitM-1 Demo Board ×1

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Enter the code in the box below:

Continue

Tags: ESP32-S2-DevKitM-1, Development, Board, DFR0813,

Designed with by Ish Gupta