Categories


Dynamixel YM080-230-R099-RH

Product Code: ROBT 902-0203-000

Dynamixel YM080-230-R099-RH

₹288,349.00
GST inclusive



Qty:

Availability: Pre-Order


Add to Wish List



YM080-230-R099-RH is an all-in-one robot actuator with a built-in cycloidal reducer, specifically the

DYNAMIXEL DRIVE (DYD) DYD-17H-099 model.

 

 

DYNAMIXEL DRIVE (DYD) cannot be replaced after purchasing the product.

Features

High Performance Frameless Motor with Hollow Shaft

Torque control based on current sensing

PID control to enhance position, speed reliability and accuracy

The integrated absolute magnetic encoder and replaceable battery allow multi-turn position information to be retained

even after complete power-off (with back up battery).

Metal housing for high durability

Modular configuration makes it easy to create applications of varying degrees of freedom

Package Components

Products Qty. Note
YM080-230-R099-RH 1 DYNAMIXEL-Y(R-option)
Robot Cable-2P-X4P 600mm(Convertible) 1 RS485 2P-4P Cable(MOLEX-JST)
Robot cable-2P 600mm 1 RS485 2P Cable(MOLEX-MOLEX)
Cord End Terminal(L14/P8) 4 For power connection
Terminal Plug(39500-0002) 2 For power connection
Wrench Bolt WB M3X20 14 For Output shaft assembly
Wrench Bolt WB M4x10 10 For frame assembly

How to Connect a Multi-turn Backup Battery

1. Disconnect the power from the DYNAMIXEL-Y and release the locking bolt on the battery cover.

2. Open the battery cover.

3. Connect the battery cable.

4. Reattach the battery cover.

5. Tighten and secure the locking bolt of the battery cover.

6. Run DYNAMIXEL Wizard 2.0, and follow the battery replacement procedure.

7. Refer to the e-Manual for details (link)

Drawing

Drawing download

Assembly guide

Caution

- Please be aware of different operational voltage from other DYNAMIXEL series (Operational voltage: 24V).

- Please refer to the drawings provided online when combining with other power transmission products.

- This product is designed as an integral unit; the cycloidal reducer and motor cannot be separated for individual use.

- Please be cautious of overheating during prolonged high-speed usage. 

- Please use a frame that matches the screw length considering the depth of the tabs indicated in the drawing.

- After purchasing the product, ensure to connect the multi-turn backup battery before use.

- Please refer to the drawings when combined with various products such as reducers, linear actuators, and

servo cylinders depending on the intended purpose.

- For additional precautions, please refer to the e-manual.

Specification

Model Name YM080-230-R099-RH
Series DYNAMIXEL Y
MCU ARM Cortex-M4 (168 [Mhz], 32 [bit])
Input Voltage Min. [V] -
Recommended [V] 24.0
Max. [V] -
Performance Characteristics Voltage [V] 24.0
Stall Torque [N·m] -
Stall Current [A] -
No Load Speed [rpm] 32.2
No Load Current [A] -
Continuous Operation *) Voltage [V] 24.0
Torque [N·m] 26.0
Speed [rpm] 20.2
Current [A] 10.7
Resolution Resolution [deg/pulse] 0.0000069358
Step [pulse/rev] 51,904,512
Angle [degree] 360
Position Sensor Contactless absolute encoder (19Bit, 360 [deg])
Multi-turn (18Bit, 262,144 [rev], Battery back up)
Operating Temperature Min. [°C] -5
Max. [°C] 55
Motor Frameless BLDC
Baud Rate Min. [bps] 9,600
Max. [bps] 10,500,000
Control Algorithm PID
Gear Type Cycloid
Gear Material Metal
Case Material Metal (Plastic Bottom)
Dimensions (WⅹHⅹD) [mm] D80 x 78.1
Dimensions (WⅹHⅹD) [inch] D3.14 x 3.07
Weight [g] 1,200.00
Weight [oz] 42.33
Gear Ratio 99:1
Backlash [arcmin] < 3.0
Backlash [deg] -
Command Signal Digital Packet
Protocol Type Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical) RS-485 Multidrop Bus
ID 0 ~ 252
Feedback Position, Velocity, Current, Temperature, Voltage, etc
Protocol version Protocol 2.0
Operating Mode / Angle Current Control mode:Endless turn
Velocity Control mode:Endless turn
Position Control Mode : ±1,323 [Rev]
Output [W] 230
Standby Current [mA] 40

* ) *Continuous operation: Please refer to the performance curve for details including torque and contact us separately in a long-term use environment.

Link

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by