The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 5 parameters, including the most relevant for water control such as dissolved oxygen, oxidation-reduction potential, pH, conductivity and temperature.
Specifications:
Sensor type: Galvanic cell
Range: 0~20mg/L
Accuracy: ±2%
Maximum operation temperature: 50ºC
Saturation output: 33mV ±9mV
Pressure: 0~100psig (7.5Bar)
Calibration: Single point in air
Response Time: After equilibration, 2 minutes for 2mV
You will be able to calibrate this sensor using DO Calibration Solution
For more information, see the following article.
Documentation:
Waspmote Quick Tutorial
Waspmote Smart Water Technical Guide
Waspmote Site
Waspmote Technical Guides
Sensor Boards Technical Guides
Networking Guides
Developers Forum
Videos
Articles
50 Applications with Waspmote
FAQ: Waspmote Vs. Arduino