DC Geared Motor SPG50-180K

SPG50 is 3.4W DC brushed motor with compact size, a low cost solution for projects such as medium size robot, omni drive robot, mechanism, etc. This model of SPG50 brushed motor comes with gear ratio of 180:1 and can operate up to 12 volts (tested 9V to 15V). Each motor is 6mm diameter D-shaft.

Note:Lower voltage might not have enough torque to drive the wheel or mechanism; higher voltage will provide higher torque and higher speed, but it will shorten the life of the motor.

Mounting

For mounting, the depth of the thread of the motor is 3.2 mm. So, you need to use 3.2 mm length of M3 size screw (not included with the thickness of the bracket). Longer screw will damage the gear box. You may need to consider the thickness of the bracket or other mechanism that you need to attach to the motor for choosing the right length of screw.  

Specifications:

• Rated voltage: 12VDC

• No load current (mA) : < 300
• No load speed (r.p.m) : 24 ± 2.4 
• Rated load torque (kgf.cm) : 15
• Rated current (mA) : < 1000
• Rated load speed (r.p.m) : 19 ± 1.9
• Weight: 300g
• Gear ratio: 180:1
• Shaft: 6mm diameter x 15.5mm length
• Motor dimension (w x l x h): 37 x 37 x 106.8mm (inc shaft)
• More power compared to SPG30 series
• Sample Application: lightweight mechanism such as: bank note machine, handling machine, educational robot, etc

You may need:

• 2A motor driver shield - For Arduino user

• Plastic Wheel - for mobile robot

• Coupling - for mounting customized wheel or mechanism

• Bracket - for mounting motor

Note: For Bracket, 4 Screws has been provided, 2 x 6mm(length) M3 Screw and 2 x 10mm(length) M3 Screw. To mount the motor to the bracket, you need to use 2 x 6mm(length) M3 Screw. 

Document :

• Datasheet

Tutorial:

• How to choose suitable motor
• Using MDD10A with Arduino UNO
• Arduino + PS2 + MDDS10A - Mobile Robot

Video: