CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V
Product Code: Phidgets 3509_1
This DC Voltage sensor measures DC voltage up to 200V. Powered by an external 12VDC power supply, the DC Voltage Sensor provides a 0 to 5VDC analog signal that is linearly proportional to the voltage measured at the terminal blocks.
The DC Voltage Sensor can easily be mounted using the screw holes, or on a 35mm wide DIN rail for quick installation. The terminal blocks accommodate conductors of up to AWG #16.
The voltage sensor connects to an analog input on Phidgets I/O boards. The formula to translate the output voltage into measured voltage is:
V = Vout * 40
Connection
You can use a 12V sensor adapter to connect this sensor to your InterfaceKit or Hub. See the Connection & Compatibility tab for more details.
Product Specifications
| Sensor Properties | |
|---|---|
| Sensor Type | Voltage (DC) |
| Sensor Output Type | Non-Ratiometric |
| Input Voltage Min (DC) | 0 V DC |
| Input Voltage Max (DC) | 200 V DC |
| Measurement Error Max | 0.5 % |
| Sensor Response Time Max | 400 ms |
| Electrical Properties | |
| Supply Voltage Min | 12 V DC |
| Supply Voltage Max | 12 V DC |
| Current Consumption Max | 4.2 mA |
| Isolation Voltage (DC) | 2.5 kV DC |
| Output Voltage Min | 0 V DC |
| Output Voltage Max | 5 V DC |
| Physical Properties | |
| Recommended Wire Size | 12 - 24 AWG |
| Operating Temperature Min | 0 °C |
| Operating Temperature Max | 50 °C |
Documents
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta