PhidgetInterfaceKit 0/16/16

Note: The 1012_3 is functionally the same as the 1012_2B, but some of the specifications have changed due to components shortages changing the parts we use. See the Specifications tab for more information.

The PhidgetInterfaceKit 0/16/16 has sixteen digital inputs and sixteen digital outputs.

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range: 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a low-side switch to a shared ground, so the circuit you're switching will need an external power supply. Each output is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

Features

• 16 digital inputs that can withstand up to 30V DC
• 16 solid state low-side switch outputs
• Plugs directly into your computer via USB

Comes Packaged with

• Hardware mounting kit:
• 4x M3 Bolts (2cm Length)
• 4x Plastic spacers (5mm Length)
• 4x M3 Nuts

Guides

Digital Input Guide

A digital input is a device that can read the state of a digital signal. Digital signals are either high or low (1 or 0). Check out this guide for more information.

Open Collector Digital Output Guide

Open collector digital outputs behave like a solid-state relay that switches a line to ground.

Product Specifications

Documents

• Mechanical Drawings
• Download 3D Step File