Atlas Scientific Conductivity Probe K 10
Over the years, we have tested an endless number of conductivity probe designs. Our research has shown us that not all conductivity probes are the same. Many lower-quality probes are susceptible to “fringe effect,” which makes the readings change when the probe is near an object. This effect makes it very difficult to take accurate readings. The Atlas Scientific line of conductivity probes has been designed to provide stable and precise readings free of fringe effect over a broad conductivity range.
Because conductivity probes don’t have any electrolyte that gets depleted, they only need to be calibrated during installation.
Specification
| Reads | Conductivity |
| Range | 10 μS/cm − 1 S/cm |
| Accuracy | +/ – 2% |
| Response time | 90% in 1s |
| Temperature range °C | 1 − 110 °C |
| Max pressure | 200 PSI |
| Max depth | 60m (197 ft) |
| Connector | Male SMA / Male BNC |
| Cable length | 1 meter |
| Internal temperature sensor | No |
| Time before recalibration | ~10 years |
| Life expectancy | ~10 years |
Related Documents
LEGACY Conductivity Probe Datasheet
How to measure the conductivity of soil
How to properly cut your probe cable
Enter the code in the box below: