Atlas Scientific EZO Embedded Flow Meter Totalizer
Product Code: AS EZO-FLOW
Reading the signal from a flow meter is easy; until you actually try and do it. A few missed pulses here and there leads to massive inaccuracies over a relatively short time. To accurately read and totalize flow rate, a subsystem must be used that has been specifically designed to do just that (hint don’t use your CPU to totalize flow; it’s busy doing other things).
The EZO-Flow can read be used with your own pulsed D.C. flow meter, or it can be connected to one of the flow meters we offer.
Specification
| Reads | Total flow and flow rate |
| Preprogrammed | Works with all Atlas Scientific flow meters |
| Programmable | Can work with most off-the-shelf flow meters |
| Visual display | Real time turbine rotation |
| Data protocol | UART & I2C |
| Default I2C address | 104 (0x68) |
| Operating voltage | 3.3V − 5V |
| Data format | ASCII |
| Circuit dimensions | 13.97mm x 20.16mm (0.55″ x 0.79″) |
| Weight: | 1.76 grams |
Related Documents
EZO™ Embedded Flow Meter Totalizer Datasheet
Raspberry Pi Sample Code (UART, I²C, USB)
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta