100:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)

This gearmotor is a powerful 24V brushed DC motor with a 102.08:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 6533 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

Dimensions

General specifications

Performance at maximum efficiency

General specifications

Notes:

• Length measurement is from gearbox face plate to back of encoder cap (it does not include the output shaft). See dimension diagram for details.
• D shaft.
• Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
• This is the output power at the maximum recommended operating load of 10 kg⋅cm; higher power might be achievable for brief durations at higher loads (see performance graphs in the datasheet).
• This motor will run at 12 V but is intended for operation at 24 V.
• May vary by a few centimeters.

Related Documents

• Datasheet for Pololu 37D Metal Gearmotors (2MB pdf)
• Dimension diagrams of the Pololu 37D mm Metal Gearmotors (459k pdf)
• 3D models of 37D mm gearmotors (7MB zip) (Note:This file contains 3D models (in the step file format) of the 37D mm gearmotors with and without encoders.)